Sanitary equipment and fittings

Thermostatic mixing valve for mixed water distribution 30 – 60 °C, supplies 1 – 11 draw-off points, with anti-scald protection and temperature adjustment. Recommended flow rate: 5 to 33 L/min. 40 mm centers.

Repair kit for PREMIX CONFORT 3/4" or 1" thermostatic mixing valve (from 06/2008), with thermostatic cell and anti-scalding safety – shuts off if cold or hot water supply fails.

Repair kit for PREMIX COMPACT thermostatic mixing valve with thermostatic cell and anti-scalding safety – automatic shut-off if hot or cold water supply fails.

Repair kit for PREMIX CONFORT 1 1/4" or 1 1/2" thermostatic mixing valve (from 06/2008), with thermostatic cell and anti-scalding safety.

Chrome-plated brass extension, Ø24 mm, 100 mm long.

Chrome-plated brass extension, Ø26 mm, 50 mm long.

Chrome-plated brass extension for wall-mounted time-flow valves, 50 mm long, with Ø1/2" threaded rod, 85 mm long (can be cut to size).

Ø80 mm wall plate with reinforced fixing, for TEMPOMIX, TEMPOSTOP, and TEMPOSOFT wall-mounted mixers. Thickness 4 mm, 4-screw fixing. Recommended for installation on panels or light partition walls.

Straight connector with integrated shut-off valve, made of nickel-plated brass, length 35mm, without nut.

Straight STOP connector with integrated shut-off valve and cover nut, length 45mm. Made of nickel-plated brass.

Straight STOP connector with integrated shut-off valve and cover nut, length 70mm. Made of nickel-plated brass.

Elbow STOP connector with integrated shut-off valve and cover nut. Made of chrome-plated brass.

Elbow STOP connector with integrated shut-off valve and cover nut. Made of chrome-plated brass.

Elbow STOP connector with integrated shut-off valve and cover nut. Made of chrome-plated brass.

Elbow connector without shut-off valve, with cover nut. Made of chrome-plated brass.

Elbow connector without shut-off valve, with cover nut. Made of chrome-plated brass.

Reinforced surface-mounted connector made of chrome-plated brass with Ø14 cap nut, complete with fixing screws.

Elbow connector without shut-off valve, equipped with 2 cover nuts, made of chrome-plated brass. Pack of 2.

Ø10mm non-return valve for basin and sink taps. Prevents backflow of contaminated water into the system and cross-flow between hot and cold water.

Non-return valve for PREMIX COMPACT thermostatic mixing valve.