Basin taps

For wall-mounted TEMPOMIX 3 hot and cold water mixers with concealed water connections connected directly to the system. For profiles, solid walls, and panels 5–25 mm thick. Allows for safe system flushing.

Washbasin mixer with temperature control and push-button operation. Concealed water connections.

Washbasin mixer with temperature control and push-button operation. Concealed water connections.

Deck-mounted washbasin mixer with temperature control and push-button operation.

Washbasin mixer for service duct installation, for walls up to 110 mm thick, with temperature control and push-button operation, and with a stopcock.

Washbasin mixer for service duct installation, for walls up to 110 mm thick, with temperature control and push-button operation, and with a stopcock.

Washbasin mixer with temperature control and push-button operation, with swivelling spout.

Washbasin mixer with temperature control and push-button operation, with fixed spout.

Washbasin mixer with temperature control and push-button operation, with fixed short spout.

Deck-mounted washbasin mixer with temperature control and push-button operation, with stopcock.

Deck-mounted washbasin mixer with temperature control and push-button operation, without stopcock.

Washbasin mixer for service duct installation, for walls up to 220 mm thick, with temperature control and push-button operation, and with a vandal-resistant fixed spout.

Washbasin mixer with temperature control and push-button operation, with fixed short spout.

Washbasin mixer with temperature control and push-button operation, with swivelling spout.

Raw brass backnut for 1/2" wall-mounted valves and spouts. For installation behind a partition wall or under a washbasin. Supplied with three stainless steel screws and Ø44 mm sealing washer.

Reinforced surface-mounted connector with aesthetic cover. Recommended for installing TEMPOMATIC 3 (No. 443006) and TEMPOMATIC 4 (No. 443436 and 443536) wall valves with surface-mounted water supply.

Invisible screw-in flow straightener with O-ring seal. Pack of 2.

Scale-resistant strainer set to 3 L/min, flow regulation from 1.5 to 6 L/min at 3 bar. Limits bacterial growth, does not retain water or impurities. Pack of 2.

For washbasin tapware with limited flow (models 25061T1, 2506T1 and H9726), provides a controlled flow of 5 l/min without splashing. No water stagnation, limits bacterial development. Made of Hostaform® and chrome-plated brass.

For washbasin tapware with limited flow (models 25061T1, 2506T1 and H9726), provides a controlled flow of 5 l/min without splashing. No water stagnation, limits bacterial development. Made of Hostaform® and chrome-plated brass.